Win a StewMac Sun Fuzz Pedal Kit!

To celebrate the milestone of achieving 75k Subscribers on YouTube, Corey Congilio is giving away a StewMac Sun Fuzz Pedal Kit and Pedal Building Tool Set!

One Grand Prize Winner will receive a StewMac Sun Fuzz Pedal Kit and Pedal Building Tool Set (Retail Value $216.93)

The StewMac SunFuzz!

Inspired by Analogman's Sun Face, our version finally gives you the control and tone shaping you've always wanted from the original Fuzz Face circuit. If you love Hendrix, Clapton, or Gilmour—this fuzz must be on your board.

The Fuzz Face is one of the foundational tones for electric guitar. However, the originals can be hard to control and don't play nice with many pickups and amps—even temperature can completely change the tone! Following Analogman's lead, we've swapped the germanium transistor for a silicon BC-108, giving the pedal a brighter tone, more gain, and enhanced touch sensitivity.

The most versatile fuzz you've ever tried

With simple controls for volume, fuzz, and tone it's easy to dial in just a touch of fuzz for chunky chords or max it out for super saturation and sustain. Want to go deep? You can further tailor the sound with the internal clean and bias controls for infinite tone tweaking. And it sounds great with humbuckers, single-coils, and P-90s—this fuzz can do it all.

Designed with the beginning pedal builder in mind

No need to wait months for Analogman or try your luck on the used market—this is an easy pedal to build.

We include everything you need:

• 32 page step-by-step instructions written for the first time builder
• Top quality, high tolerance components from resistors to switches
• Road-worthy rugged metal enclosure with all holes pre-drilled
• Bare or powder coated white finish
• 3PDT breakout board for low noise
• Internal trim pots for tone shaping
• Input, output, and power jacks rear mounted for easy cable routing
• True bypass
• Custom printed labels

Nobody does instructions like StewMac

This is a fun project where you'll learn a lot. You'll see every solder joint and resistor value to make sure your build is perfect from start to finish. And if you get stuck, our team is here to help! Be proud every time you step on the custom pedal that you built.

Make your pedal your way

It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that's ready to put on your board now. Take the first step to customize your sound.

Powered by a 9 volt power supply with a 2.1mm negative-center barrel, available separately.

The StewMac Pedal Building Tool Set

Start building your own effects pedals

Are you ready to take control over your sound? Here's all the right tools you need to get started.

Building pedals is super fun and really rewarding. With just a few solder joints and a bit of tinkering, you can shape your tone in completely new ways. When you're first getting started it can seem overwhelming with all the tiny transistors, resistors, and delicate connections. Now we've made it easy even if you're new to working on electronics.

We've picked the quality tools pros use so you'll have great sounding pedals right from the start. From keeping PC boards steady, to stripping fine wires, to making tiny connections, this set has everything you need for solid connections and trouble-free builds.

The Pedal Building Tool Set includes:

Guitar Tech Screwdriver and Wrench

This handy screwdriver set has every specialized bit you need to build pedals and a whole lot more. With this set you can install all of the knobs, switches, nuts, and jacks you'll come across, and even adjust tiny trim pots inside pedals too. Not only that, you can adjust all the hardware on your instruments too.

PC Board Holder

This is the essential third hand you need when building pedals! One small slip can ruin a trace or melt a fragile component. You need both hands for these jobs, and holding your work steady is important for a clean connection (and so you don't burn yourself!). This holder locks the board steady and moves in any direction you need, which makes it easy to solder on crowded PCBs.

Wire Cutter

This isn't your ordinary wire cutter—the extremely fine angled cutter allows you to get close to your solder joints and trim away all excess component leads. This is integral to having fewer shorted connections in your builds.

Fine-gauge Wire Stripper

Pedals (and pickups too) use very fine wires that are nearly impossible to strip with hardware store strippers, and it's easy to damage the wire and ruin the connection. These strippers make removing the coating from tiny wires a total breeze.

Solomon SR-965 Soldering Iron

This dependable iron gets the job done without breaking the bank. The fine point tip is perfectly made for soldering a printed circuit board. It heats up fast and gives you the right control to make delicate connections.

Solomon Soldering Stand

The stand keeps the iron held safely and the included sponge keeps the tip clean for better connections.

Solder Wick

The right way to fix soldering mistakes! Solder Wick is essential for getting the solder out of a joint without overheating and burning out the pads on delicate printed circuit boards. It helps clean up excess solder too.

Kester Pocket-Pak Solder

The right solder for guitar electronics! We find that one tube lasts for 3-4 pedals worth of solder joints. Approximately 15 feet (457cm) of 60/40 rosin core solder in a handy, easy to use compact dispenser tube.

Gain entry points below, the more points you get, the better your chances of winning!

*Please Note - Contest open to U.S Residents only! By entering the contest, all entrants are agreeing to opt in to the mailing list of CoreyCongilio.com and WorkingClassGuitar.com Opt out anytime! Corey Congilio and Working Class Guitar.com pay all shipping costs and will NEVER send an email or respond to a comment announcing the winner before the end date.

Entry Methods:

• StewMac Sun Fuzz Pedal Kit and Pedal Building Tool Set by Corey Congilio #giveaway #win
• Click here every day for more entries!
• Subscribe to Corey's channel on YouTube!
• Check Out The SunFuzz Pedal Kit!
• Watch Corey's Demo of the Sun Fuzz!